Online Bike Scrapyard

Contact us for any other spares that is not displayed on website.1000's of spares available

AA97.31 Intake rubber Cg 125

AA97.30 Intake rubber CG 150

IT1.85 Carburator Diaphrames GY6-125 (22mm) + Needle..

IT1.86 Carburator Diaphrames GY6-150 (24mm) + Needle..

IT1.87 Carburator carb kits GY6-125 - Jets, needle, seat and float ..

IT1.88 Carburator kits CG 125 - Jets, needle, seat and float ..

IT1.88 Carburator kits CG 150 - Jets, needle, seat and float ..

IT1.89 Carburator kits CG 200 - Jets, needle, seat and float..

IT1.90 Carburator kits GY6-150 - Jets, needle, seat and float..

IT1.91 Carburator Kit90/110ccJet, needle, seat & Float..

IT1.92 Carburator GY6 150 - Intake ID - 38mm, Outlet ID - 26mm, Slide ID - 24mm - Electric Choke..

IT1.93 Carburator 90/110ccManual ChokeIntake ID - 33mmOutlet ID - 18mmSlide ID - 16mm..

IT1.94 Carburator GY 250 (Linhai 260)Electric ChokeIntake ID 43mmOutlet ID 30mmSpeed PumpHeat Sensor..

IT1.96 Carburator GY6 125 - Intake ID - 37mm, Outlet ID - 24mm, Slide ID - 22mm - Electric Choke..

IT1.97 Carburator CG 125 – Intake ID - 34mm, Outlet ID - 25mm, Slide ID - 20mm - Manual Choke..

IT1.98 Carburator CG 150 – Intake ID 35mm, Outlet ID 26mm, Slide ID 22mm - Manual Choke..

IT1.99 Carburator CG 200 – Intake ID 38mm, Outlet ID 29mm, Slide ID 24mm - Manual Choke.

IT1.169 GY6-125/150Electric Choke..

IT1.176 GY6Float..

IT1.177 Pump with filterHole - Hole 77mm..

IT1.178 Tap & Filter Nut OD 14mmID 9mm..

IT1.179 GY6 Vacuum & FilterNut OD – 22mm ID - 15mm ..

IT1.180 TapDouble FilterHole to Hole 34mm.

IT1.181 Single FilterNut OD – 22mm ID – 15mm..

IT1.182 GY6 Vacuum 3 Point..

IT1.183 Inline..

IT1.184 CG Tap + Filter Nut OD – 18mm ID 13mm..

IT1.233 Hose 5mm 20 Meter roll..

IT1.234 InlineBig..

IT1.235 Inline Small..

IT1.236 Intake Manifold,(Linhai), Hole ID - 29mm, Hole to hole - 62mm..

IT1.237 GY6 – Scooter, Hole ID 23mm, Stud - stud 45mm..

IT1.238 EN 125 - Hole ID 23mm, stud - stud 60mm..

IT1.239 CG 125 - Hole ID 28mm, centre - centre 62mm, Stud - Stud 48mm..

IT1.340 CG 200 - Hole ID 30mm, Centre - Centre 62mm, Stud - Stud 48mm..

IT1.241 QJ 125 - Hole ID 28mm, centre - centre 62mm, Stud - Stud 48mm..

IT1.242 QJ 150 hole ID 28mm centre-centre 62 mm, stud-stud 46mm

AA68.1 Fuel tap eye to eye 34mm

AA73.13 Carburetor Gpr 250 with prime

AA70.6 Fuel pump vacuum GY6

AA73.11 Throttle tube holder

AA74.16 Intake manifold

AA75.5 Intake manifold

AA89.18 Fuel Tap - R200